Low price Analog Signal to RS485/232 Converter
  • Model: WJ121
  • In Stock: 9984

Low price Analog Signal to RS485/232 Converter

$20.88
Features:                                                                                 ...

Add to Cart:
Min:  2
  • Shipping Weight: 100lbs
  • This product was added to our catalog on Friday 14 May, 2021.
Description
Features:                                                                                                 >> Analog signal acquisition, isolated RS-485/232 output
>> 12-bit AD converter, testing accuracy>0.1%
>> Can Program and calibrate modules accuracy via RS-485/232 interface
>> Signal input/output: 1000VDC Isolation
>> Wide power supply: 8~32VDC
>> High reliability, easy programming, easy installation. 
>> Can program setting module address, baud rate
>> 0-5V voltage signal or 4-20mA current signal input 
>> Supports MODBUS RTU protocol
>> DIN35 Rail-mounted 
>> DIN35 Rail-mounted 
>> Size: 105.5x24x59mm
>> AD conversion rate can be programmed
General parameters:
 (typical @ +25 ℃, Vs to 24VDC)
 Input type: Input current / voltage input
 Accuracy: 0.1%
 Temperature drift:± 50 ppm / ℃ (± 100 ppm / ℃, maximum)
 Input Resistance: 150Ω (4-20mA/0-20mA/0- ± 20mA current input)
              300Ω (0-10mA/0- ± 10mA current input)
              1.5KΩ (0-1mA/0- ± 1mA current input)
              >200K (5V/10V voltage input)
              >1MΩ (<2.5V voltage input)
Bandwidth:  -3 dB 10 Hz
Conversion rate: 10 Sps (factory default, the user can send commands to modify the conversion rate)
               You can set the AD conversion rate 2.5 SPS, 5 SPS, 10 SPS, 20 SPS.
(Channel conversion rate = AD conversion rate / Open numbers of channel)
               NOTE: after Modify the conversion rate, need re-calibration module, otherwise the measurement data will be biased. You can also specify the conversion rate when ordering, we press the conversion rate you require recalibration in the factory.
 
 
Reviews (0)
There are currently no product reviews.
Back to Top