2-channel DI pulse counter, Modbus 2.4Gand5Gdual frequency WiFi
  • Model: WJ161P
  • In Stock: 10000

2-channel DI pulse counter, Modbus 2.4Gand5Gdual frequency WiFi

$19.99
1-channel encoder or 2-channel DI pulse counter, Modbus and MQTT, 2.4Gand5Gdual frequency WiFi WJ161P Product features:  Encoder decoding and conversion to standard Modbus TCP protocol  Can be used as encoder counter or speed measurement  Support encoder counting, identify...

Please Choose:

Communication interface 2



Antenna






Add to Cart:
  • Shipping Weight: 100g
  • This product was added to our catalog on Wednesday 04 November, 2026.
Description

1-channel encoder or 2-channel DI pulse counter, Modbus and MQTT, 2.4Gand5Gdual frequency WiFi WJ161P

Product features:
 Encoder decoding and conversion to standard Modbus TCP protocol
 Can be used as encoder counter or speed measurement
 Support encoder counting, identify positive and negative rotation, and 4-fold counting
 It can also be set as a 2-way independent DI high-speed counter
 Count value is automatically saved after power failure
 DI input supports PNP and NPN input
 Filter time can be set when relay and mechanical switch input
 You can reset and set the count value through WiFi
 Built in webpage function, data can be queried through webpage
 One NPN with pull-up DO output can directly drive the relay
 Wide power supply range: 8~32VDC
 High reliability, convenient programming and easy application
 Standard DIN35 guide rail installation, convenient for centralized wiring
 The user can set the module IP address and other parameters on the web page
 Low cost, small volume, modular design
 Overall dimension: 79 x 69.5x 25mm
 Difference from WJ161: 1. It supports both 5GHz and 2.4GHz dual band WiFi, with more channels andmorestable communication. 2. The processor clock frequency is up to 240MHz, with faster response speed and better stability.You canselect therequired data submission. 3. The Websocket function is deleted.Overall dimensions: 106 x 59 x 37mm
Typical applications:
 Encoder pulse signal measurement
 Flow meter pulse counting or flow measurement
 Product count of production line
 Count the number of logistics packages
 Proximity switch pulse signal measurement
 Encoder signal is transmitted to IPC
 Pulse counting of water meter or electricity meter
 Intelligent factory and industrial Internet of Things
 Punch times count
 Quantity counting of injection molded products
 MES system data statistics

Product Overview: WJ161P product is a collection module of Internet of Things and industrial Ethernet, which realizes transparent data interaction between sensors and networks.The switch value data of the sensor can be forwarded to the network.WJ161P series products include power conditioning, switching value acquisition and WiFi networkinterfacecommunication.The communication mode adopts MODBUS TCP protocol.TCP is a protocol based on thetransportlayer. It is a widely used, connection oriented and reliable protocol.Users can directly set the module IPaddress, subnetmask, etc. on the web page.It can be used to monitor and control the operation of sensor equipment. WJ161P series products are intelligent monitoring and control systems based on single chip microcomputer.Configuration information such as module IP address and subnet mask set by users are stored in non-volatilememoryEEPROM. WJ161P series products are designed and manufactured according to industrial standards, withstronganti-interference ability and high reliability.Operating temperature range -45 ℃~+85 ℃.

Function introduction: WJ161P remote I/O module can be used to measure 1 channel encoder signal, and can also be set as 2 channels of independent counter or DI status measurement. 1. Signal input One channel encoder signal input or two channels of independent counter can be connected to dry contact andwetcontact, and the input type can be set by command. 2. Signal output One channel DO signal output, NPN with internal pull-up, the output high level is about equal to the power supplyvoltage, and the low level is about 0V, which can directly drive the intermediate relay. 3. Communication protocol Communication interface: WiFi network interface.It can be connected to WiFi in the LAN. Communication protocol: MODBUS TCP protocol is adopted to realize industrial Ethernet data exchange.It canalso communicate with the module through TCP socket. Network cache: 2K Byte (both receiving and sending) Communication response time: less than 10mS. 4. Anti interference There are transient suppression diodes inside the module, which can effectively suppress various surge pulsesandprotect the module.

Product model: WJ161P             WiFi 
      Antenna form
      W External antenna
    Communication interface  N Built in antenna
    WiFi: output as WiFi network interface X sucker antenna

WJ161P general parameters:
(typical @+25 ℃, Vs is 24VDC)
Input type: encoder AB signal input, 1 channel (A0/B0). Low level: input<1V
High level: input 3.5~30V
The frequency range is 0-20KHz. Encoder counting range ‭ -2147483647 ‭~‭+2147483647 ‭
DI counter range 0~4294967295
Input resistance: 30K Ω
Output type: DO output voltage signal, NPN with internal pull-up output can directly drive the intermediate relay.Theinternal pull-up resistance is 3K. Low level (0): 0V, current max. 100mA
High level (1): power supply voltage -1V

Communication: MODBUS TCP communication protocol or TCP socket character protocol, and support MQTTprotocol
Web page: support the web page access module, and support the web page setting module parameters. Interface: WiFi network interface. Working power supply:+8~32VDC wide power supply range, internal anti reverse connection andovervoltageprotection circuit
Power consumption: less than 1W
Operating temperature: -45~+80 ℃
Operating humidity: 10~90% (no condensation)
Storage temperature: -45~+80 ℃
Storage humidity: 10~95% (no condensation)
Overall dimensions: 106 mm x 59 mm x 37 mm

Product manual:https://www.wayjun.cn/d/

Reviews (0)
There are currently no product reviews.
Back to Top